Your Air Conditioner
OFF
FAN
COOL
SELECTOR
Selector
OFF
turns air conditioner off.
FAN
low fan speed
operation without cooling.
*
MED
FAN
permits
medium fan
speed operation without cooling.
*HIGH FAN permits high fan
speed operation without cooling.
*For FAN operation, Energy Saver
be in
2
9
1
10
THERMOSTAT
Thermostat Control
When you turn the Thermostat
Control to the desired setting, the
thermostat will automatically control
LOW COOL permits cooling with
low fan speed operation.
MED COOL permits cooling with
medium fan speed operation.
HIGH COOL permits cooling
with high fan speed operation.
the temperature of the indoor air.
The higher the number selected,
the cooler the indoor air will be.
Saver
(on models so equipped)
NORMAL m
ENERGY SAVER
SAVE
The Energy Saver Switch controls
the fan operation. When it’s in
OPEN
Ventilation Control
The vent door in your air
conditioner is closed when the
slide switch is to the
When
the vent is closed,
air
inside the room can be circulated
and conditioned. Sliding the knob
to the left opens the vent door,
allowing a small amount of indoor
air to be exhausted from the room.
Setting the Ventilation Control at
OPEN lets room air be exhausted
to the outside. This is helpful in
stale air, smoke or odors
from the-room, and
outdoor
air to enter through normal openings
in the house. However, cooling
effectiveness is reduced when this
control is set at OPEN, so we
you don’t keep it there
especially in hot, humid weather.
(continued next page)
the
position, the fan
circulate room air continuously.
When it’s in the SAVE position, the
fan will automatically cycle on and
off with the compressor.
3
