6
Operating the Clock
EN
Sleep Mode
In sleep mode, the radio will turn off au-
tomatically. Simply:
1. Press
SLEEP
then the time display will
exhibit
0:59
and the radio will turn on.
2. While holding
SLEEP
, press
REV
or
FWD
to set the sleep time. The time range is
from 1 minute to 2 hours.
3. Release
SLEEP
and the current time will
be shown again. The radio is turned
on and you may select the station as
usual. The radio will turn off when the
preset time elapses. If you decide to
turn off the radio sooner, press
SNOOZE
or
ON/OFF
.
4. When
SLEEP
is activated again, the
sleep time will be the same as the one
you have set before.
5. Press
SLEEP
to read the remaining sleep
time.
Nap Mode
This function wakes you up after a short
period of time. Simply:
1. Press
NAP
and release. The green
NAP
indicator will flash. During this period,
adjust NAP time by pressing
REV
or
FWD
. The range is from 10 minutes to
2 hours.
2. The clock will be shown after 5 seconds
if no button is pressed. The NAP indica-
tor will lit up.
3. Press
NAP
once to show time left.
Stop the Nap alarm
Press
NAP
or follow “Turning off Alarm”.
1. Press and hold
NAP
to cancel the nap
setting.
2. Only alarm sound can be selected.
3. Nap alarm is equipped with
GRAD-U-
WAKE
feature.
Turning off Alarm
Silence the alarm momentarily
Press
SNOOZE
. The alarm will sound again
when the snooze period is over. (see
“
Snooze Alarm Operation
”).
Stop the alarm
Press
ON/OFF
. Then, the alarm will be on
the following day at the same time.
Disable the alarm permanently
1. Press
CANCEL
button.
2. The
WAKE
indicator will be flashing.
3. Press
WAKE 1
or
WAKE 2
button within
3 seconds to deactivate the corresponding
alarm function permanently.
Tip: You can activate the previously
set alarm time by pressing
WAKE 1
WAKE 1
WAKE 1
WAKE 1
WAKE 1
or
WAKE 2
WAKE 2
WAKE 2
WAKE 2
WAKE 2
button
7-4894 EN-US
1/6/03, 8:33 AM
7
