Client:
PIL (Wal*Mart)
Project:
169164
Language: EN
Date:
06.03.2008
Version:
08
Page:
8
(of 14 pages)
8
Barcode: 690 5039 10 000 7 00243
OPERATION
•
Press
min
(26)
and hold for 3 seconds. The LCD display
(31)
flashes. Press again to
set minutes.
NOTE
: The time setting will be deleted if you unplug coffee maker from the outlet and do
not plug back in within 14 seconds.
flashes on LCD display
(31)
.
Starting brewing
•
Press
(30)
once to start the manual brewing cycle.
(30)
lights up. The brewing
begins.
NOTE:
To interrupt brewing, press
(30)
once more.
•
When buzzer sounds twice, the brewing cycle is complete. The keep warm cycle
starts. Remove carafe
(14)
to serve coffee
(ill.
h
)
. Return it to the keep warm plate
(12)
to keep it warm.
CAUTION
: Do not touch keep warm plate
(12)
! Do not open coffee-filling lid
(2)
during
brewing! Risk of burn injury.
•
If not used for 2 hours, the buzzer sounds 5 times and coffee maker shuts off, the
LCD remains on.
CAUTION!
•
After the brew cycle is complete, wait a minimum of 5 minutes before opening the
coffee-filling lid
(2)
. Steam builds up under the coffee-filling lid
(2)
. There is a risk of
injury from hot steam.
Extra features
•
The drip stop valve
(18)
function allows you to remove carafe
(14)
during the brewing
cycle to serve a cup of coffee (replace carafe
(14)
within 30 seconds)
(ill.
h
)
.
•
Condensation control
(5)
allows water that has accumulated under the coffee-filling
lid
(2)
, to flow into the filter area when the lid
(2)
is raised.
•
Water filter holder
(19)
with charcoal filter
(17)
.
•
Cord storage
(11)
for easy storing of the power cord
(13)
(ill.
f
)
.
Button (keep warm function):
This coffee maker is provided with an adjustable keep warm plate
(12)
to control coffee
temperature after brewing.
•
Press and hold
(27)
for 2 seconds. The digits to are flashing for 2 seconds.
Press
(27)
once more to change the heating temperature level from to .
•
After 3 seconds the LCD display
(31)
goes back to time view (default view) and the
new setting is saved.
•
Keep warm
function can be adjusted at any time. Default setting is .
