GE 45601, Руководство пользователя, Страница: 9 / 20

DELETING A DEVICE (LIGHT / NODE) FROM YOUR NETWORK
This completely removes the device from your home control network and
resets the device to its factory default settings.
Press and hold
SETUP
until screen displays
LGHT SETUP
Press
OK
followed by pressing the cursor right key 2 times the
screen will display
DELETE.
Press
OK.
Press the button on the device so that it communicates with the
remote.
When the screen displays
SUCCESS
, you have successfully deleted
the node/light from your network.
GROUPS
You can create a collection of devices (lights /nodes) that you can control
as a group. You can set up a maximum of 18 groups. A group can
contain up to 232 devices.
To create or add a device to a group:
Press and hold
SETUP
until screen displays
LGHT SETUP.
Use either Arrow key to scroll until the display reads
GRP SETUP.
Press the
OK
key and the screen will display
ADD.
Press
OK
and the screen will display
SEL DIGIT.
Press a digit (1-9) for the group you wish to add the device to. Press
SHIFT
and the digit (1-9) if you are adding a device to groups 10
through 18.
Press the
OK
key and the screen will display
SETUP WAITING.
Press the button on the device so that it communicates with the
remote.
When the screen displays
SUCCESS
, you have successfully added
the device to your group.
To control a Group:
Press
GROUP
once to put the remote into “GROUP Control” mode.
The screen will display
GROUP
. The remote will stay in this mode
until the Light, Scene or All mode is activated.
Press the digit key for the group you wish to control (1-9). Press
SHIF
T and the digit (1-9) if you are controlling groups 10 through 18.
The screen will display the selected Group.
- To turn a
GROUP
on, press and release the
ON
key for less than one
second. The screen will display the selected
GROUP
and
ON
.
- To turn a
GROUP OFF
, press and release the
OFF
key for less than one
second. The screen will display the selected
GROUP
and
OFF.
Removing a Device (Light / Node) from a Group:
This only removes the device from a specific group. The device is still
part of your home control network and the group still exists (if there were
more than one device in it to start).
Press and hold
SETUP
until the screen displays
LGHT SETUP
.
Use either Arrow key to scroll until the display reads
GRP SETUP.
Press the
OK
key followed by the cursor right key once and the
screen will display
REMOVE.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.
8.
1.
2.
1.
2.
3.