5
Pause
When a pause is needed to wait for a dial tone (for example, after you dial 9 for an
outside line, or to wait for a computer access tone), press the
pause
button to insert
a 3 second delay into the sequence when dialing (or when storing a number into
phonebook.)
Press and hold the pause button for 1.5 seconds, the screen displays a
P
. Each pause
counts as one digit in the dialing sequence.
Flash
Use the
flash
button to activate custom calling services such as call waiting or call
forwarding, which are available through your local telephone company. The screen
displays an
R
.
The
flash
button can also be used to access a new dial tone without hanging up.
Keypad Lock (only for cordless handset)
The default setting is Off.
To lock the keypad;
While phone is
OFF
, press and hold the
#/lock/format
button until a beep is heard,
the screen displays the lock icon .
To unlock the keypad;
Press and hold the
#/lock/format
button until a beep is heard, the icon is no
longer displayed.
NOTE: When the key lock is activated, you are still able to accept
incoming calls and make emergency 911 calls.
Hold (only for base)
To place a call on hold, press the
hold
button. Music is played as a reminder that
the call is on hold. Lift the corded handset or press the
speaker
button or press the
hold
button again to release the hold function.
NOTE: The cordless handset may pick up the call once it had been
put on hold by pressing the or
speaker
button.
