GE 28821 Series Скачать руководство пользователя страница 85

Страница: 85 / 99

6. Press

mute/menu OK

button to confirm and then display

VIP MELODY 01

to wait for the melody tone selection.

7. Press caller ID-volume (

) button to select from melody 01 to melody 10 (a testing tone is generated

while making melody selection)

8. Press

mute/menu OK

button to confirm.

NOTE: If the desired number/record was previously stored in any one of the ten VIP melody records,

DUPLICATE NUMBER

shows in the display.

Changing a Stored VIP Melody Record

Use the Storing VIP Melody procedure to change the number of a selected record and replace the old phone
number with new phone number.

When

REPLACE VIP# ?

shows in the display, you must press

mute/menu OK

button on the handset to confirm

replacement.

Reviewing and Deleting Stored VIP Melody Record

From the Handset Setup Menu:

1. Press the

mute/menu OK

button to enter to

VIP MELODY

menu.

2. Use the caller ID-volume (

) button to scroll to the desired

VIP Melody Record

3. If you want to delete the information, press the

delete/intercom/conf

button on the handset while the entry

displays. The display show

DELETE VIP# ?

4. Press

delete/intercom/conf

again to confirm. You will hear a confirmation tone and

VIP# DELETED

shows in

the display.

Key Tone

From the Handset Setup Menu:

1. Press the caller ID-volume (

) button to scroll to the

KEY TONE

sub-menu.

2. Press

mute/menu OK

button to enter the menu.

SET KEY TONE 1ON 2 OFF

shows in the display.

3. Use the touch tone pad on the handset to select 1 or 2, or use the caller ID-volume (

) button to scroll to

your selection.

1ON

is the default setting.

4. Press the

mute/menu OK

button to confirm and the key tone setting shows in the display.

Area Code

From the Handset Setup Menu:

1. Press the caller ID-volume (

) button to scroll to the

AREA CODE

sub-menu.

2. Press

mute/menu OK

button to enter the menu.

SET AREA CODE - - -

shows in the display.

3. Use the touch-tone pad to enter your -digit area code.

4. Press the

mute/menu OK

button to confirm. You will hear a confirmation tone and the new area code shows in

the display.

NOTE: To restore the default setting to - - -, press and release

delete/intercom/conf

when

SET AREA

CODE

shows in the display.

Tone/Pulse

From the Handset Setup Menu:

1. Press the caller ID-volume (

) button to scroll to the

TONE PULSE

sub-menu.

2. Press

mute/menu OK

button to enter the menu.

TONE/PULSE

1TONE 2PULSE

shows in the display. The

default setting is “

1 TONE

”.

3. Use the touch-tone pad or caller ID-volume (

) to enter

1 TONE

2 PULSE

4. Press the

mute/menu OK

button to confirm. You will hear a confirmation tone and your selection shows in the

display.

Registration

Your packaged handset(s) are pre-registered and ready to use. It is not recommended that a handset be
registered again unless absolutely necessary.

From the Handset Setup Menu:

Содержание 28821 Series




































































































Результаты поиска

Содержание 28821 Series

Отзывы:

GE 28821 Series, Руководство пользователя, Страница: 85 / 99

Результаты поиска

Содержание 28821 Series

Отзывы: