4
No sound from handset
• Adjust handset volume.
• Check and adjust sound settings in Skype, under "Sound Devices".
You experience static, noise, or fading in and out
• The handset may be out of range of the base. Move closer to the base.
• Make sure base is not plugged into an outlet with another household appliance.
If necessary, relocate the base.
Unit beeps
• Clean charging contacts on cordless handset.
• See solutions for “No dial tone”.
• Replace the battery.
Memory Dialing doesn’t work
• Did you program the memory location keys correctly?
• Did you follow proper dialing sequence?
Unit locks up and there is no communication between the base and cordless handset
• Unplug the USB cable and the AC power adaptor from the wall outlet and the
back of the base. Remove the handset battery. Wait for 0 seconds and plug
the power adaptor back into the base and wall outlet. Reconnect the battery and
charge for 16 hours.
Handset displays "
SEARCHING
" or "
NOT REGISTERED
" and cannot link up with the base
when the TALK/CALL BACK button is pressed.
• Handset may be out of range of the base. Move closer to the base.
• Make sure the power adaptor is properly installed.
• Disconnect the handset battery and plug it in again. Place the handset on the
cradle for at least to minutes.
• Disconnect the power adaptor and plug it in again. Then place the handset on
the cradle for at least to minutes.