18
Auto Talk
When this function is
ON
, during an external call, you may lift the handset to answer a
call immediately without pressing any buttons. To end a call, put the handset back on
the base cradle directly.
From the Initial Setup Menu:
1. Press the
caller ID-volume
(
5
or
6
) button to scroll to the
AUTO TALK
sub-menu.
. Press
mute/menu OK
button to enter the menu. The screen displays
> NO YES
.
. Use the
caller ID-volume
(
5
or
6
) button to scroll to your selection.
NO
is the
default setting.
. Press the
mute/menu OK
button to confirm.
Registration
Your packaged handset(s) are pre-registered and ready to use. It is not recommended
that a handset be registered again unless absolutely necessary.
From the Initial Setup Menu:
1. Press the
caller ID-volume
(
5
or
6
) button to scroll to the
REGISTRATION
sub-menu.
. Press the
mute/menu OK
button to enter the menu. The screen displays
YES
4
NO.
The default setting is
NO
.
. Use the
caller ID-volume
(
5
or
6
) button to scroll to
YES
or
NO
.
. If you select
YES
, press the
mute/menu OK
button. The screen displays
HOLD
BASE FIND FOR 5 SECONDS, THEN PRESS MENU OK KEY
. (Your handset should be
held near the base during registration process.)
5. Press and hold the
find
button on the base unit, the charge/in use indicator
flashes. Press the handset
mute/menu OK
button. The screen displays
REGISTERING
. The handset screen displays
REGISTERED
. You may now rename
your handset. (Refer to Step & of Handset Name Section)
NOTE: If you are re-registering the handset through the handset
menu; to rename your handset you must go to the Handset Name
Section and start from the beginning step.
