Reset All Settings
Reset all frame preferences to factory default settings.
1. Make sure your phone is
OFF
(not in talk mode).
. Press the
menu/ok
button to go to the main menu.
. Use the
5
or
6
button to scroll to
Reset All Settings
.
4. Press the
menu/ok
button to enter. The screen displays
Are you sure? No Yes
.
5. Use the
5
or
6
button to select
No
or
Yes.
6. Press the
menu/ok
button to save. The screen displays
Saved
.
7. Press the
exit
button repeatedly to return to the photo screen.
Programming the Telephone
A menu structure to give you access to all of the built-in features. You may program
the following items in main menu: Intercom, Setup HS, Setup BS, Date/Time, and
Registration.
NOTE: If the handset is not registered, or is out of range, Setup BS
and Date/Time are not programmable, and
Unavailable
displays as
you try to enter these two menus.
NOTE: During programming, you may press the mute/clear button
at any time to exit the sub-menu and return to the main menu, or
press flash/exit to exit programming and return to standby screen.
NOTE: If no key is pressed for 60 seconds, the handset will
automatically exit programming and return to standby screen.
NOTE: The handset cannot access nor navigate the Frame Setup
menu.
Handset Setup
1. Make sure your phone is
OFF
(not in talk mode).
. Press the
menu
button to go to the main menu.
. Press
cid/vol (
3
or
4
)
button to scroll to
Setup HS
.
4. Press the
menu
button to confirm and you may program the following items: Ring
Volume, Tones, Auto Talk, Handset Name and Language.
NOTE: If using a Model 27911 accessory handset, there will be
additional menu items which DO NOT apply to the 27956. These
items are used when the 27911 is paired with a model which
includes an answering system.
