14
3. Press program/flash again to store your selection. You will hear a
confirmation tone.
Rings to Answer
NOTE:
This setting may only be made with the base.
You may set the number of times you want the phone to ring before the
answering system answers a call.
1. Press the program/flash button until
RING TO ANSWER
shows in the
display.
5
is the default setting.
2. Use the caller ID (rev or skip) button to scroll to
3, 5
or
TOLL
.
NOTE:
TOLL (Toll Saver) can save you the cost of a toll call when accessing
your messages from another phone. If you have new messages, the unit
answers after the 3rd ring. If you have no new messages, the unit answers
after the 5th ring. You can hang up after the 3rd or 4th ring and save the pay
telephone or long distance charge.
3. Press program/flash again to store your selection. You will hear a
confirmation tone.
Security Code
NOTE:
This setting may only be made with the base.
You can access the answering system from any tone dialing telephone in
another location. The security code is required for remote access, and it
prevents unauthorized access to your answering system. You may only
change the security code at the base.
1. Press the program/flash button until
SECURITY CODE
shows in
the display.
2. Use the touch-tone pad to enter your new 3-digit security code. For
example, press the 6, 2, and 8 number keys for security code 628. The
default security code is
123
.
3. Press program/flash again to store your selection. You will hear a
confirmation tone.