background image

10

  Using Your Remote

SHIFT

Press 

SHIFT 

(Setup) prior to the shifted key func-

tion, e.g., for 

MENU 

- press and release 

SHIFT 

(Setup) then 

MENU 

(Info).

UP 

- press and release 

SHIFT 

then 

UP 

(Chan+).

DOWN 

- press and release 

SHIFT 

then 

DOWN 

(Chan-). 

LEFT 

- press and release 

SHIFT

 then 

LEFT 

(Vol-).

RIGHT 

- press and release 

SHIFT

 then 

RIGHT 

(Vol+). 

OK 

- press and release 

SHIFT

 then 

OK 

(Mute).

EXIT 

- press and release 

SHIFT

 then 

EXIT 

(Sleep). 
The red indicator blinks for each keypress. 

Controlling Devices with Separate 

Power On and Off Buttons

Some GE, RCA and ProScan models require 

you to press the device button for more than one 

second to turn the device on and the 

POWER 

button to turn the device off.

Controlling Combo Devices

Some Combo devices (e.g., TV/DVR, TV/DVD, 

DVD/DVR, etc.) will require you to set up two 

different Mode buttons to control both parts of the 

Combo device. For example, if you have a TV/

DVD Combo, you might need to set up one code 

under the 

TV 

button to control the TV part AND a 

separate code (under any other Mode button) to 

control the DVD part.

 

DVR/DVD Punch-Through

This remote allows the 6 DVR transport buttons 

(i.e., 

PLAY

PAUSE

STOP

FF

REWIND

, and 

REC

) to Punch-Through control from any Mode 

programmed with TV, SAT or Cable codes to the 

last 

DVR

, or 

DVD

 programmed Mode you used. 

This feature will not operate if the programmed 

TV, SAT or Cable code has its own DVR transport 

button control, e.g., a TV Combo, SAT/PVR, etc.

Содержание 24993

















Отзывы: