GE 24959, Инструкция по эксплуатации

Страница: 11 / 20

11
Setting ALL Volume/Mute Controls to
Any Mode
You can set all modes to “punch-through” to any
mode for Volume/Mute control without needing to
change to that mode by doing the following.
1. Press and hold SETUP until the indicator
remains on, then release SETUP .
2. Press and hold MUTE until the indicator blinks
off, then release the button.
3. Press and release SELECT to select the
desired mode ( TV , DVD , etc.) for Volume/Mute
control; the indicator blinks, then stays on.
4. Press and release MUTE ; the indicator turns
off. Note: The indicator will blink rapidly for 3
seconds if the mode you have selected does
not have Volume/Mute control.
5. All other modes will now “punch-through” to
your chosen mode for Volume/Mute control.
Setting Any Mode to Use its Own
Volume/Mute Control
You can set any mode to use only its own Volume/
Mute control.
Note: If your chosen mode does not have Volume/
Mute functions, then this remote’s VOLUME and
MUTE will not operate.
1. Press and hold SETUP until the indicator
remains on, then release SETUP .
2. Press and hold MUTE until the indicator blinks
off, then release the button.
3. Press and release SELECT to select the
desired mode ( TV , DVD , etc.); the indicator
blinks, then stays on.
4. Press and release VOLUME- (down); the
indicator blinks, then stays on.
5. Press and release MUTE ; the indicator turns
off.
6. All modes will now “punch-through” to the
respective modes you have chosen for Volume/
Mute
control.
Setup (cont.)