GE 24948, Инструкция по эксплуатации, Страница: 4 / 7

7 6
Using Your Remote
Code Retrieval
Code Retrieval lets you identify the
four
digit library
code stored under your device button. For example,
if you want to find out what
four
digit code is stored
under your TV device button, follow the six steps
below:
1. Press and hold the SETUP button until
the red indicator stays on, then release
the
SETUP button.
2. Press and release the desired device
button ( TV , VCR , etc.). The red
indicator blinks, then stays lit.
3. Press and release the SETUP button.
The red indicator blinks once and
remains lit.
4. To find the first digit for the code stored
under the device button pressed in step
2, press REW and count the number of
blinks.
Setting up using Code Search
If you cannot find a
4
digit code in the Code Table
that operates your TV, try searching for the code as
follows:
1. Manually turn on the device ( TV , VCR , etc.) to
be controlled.
2. Press and hold the SETUP button until
the red indicator stays on, then release
the
SETUP button.
3. Press and quickly release the desired
device button ( TV , VCR , etc.). The red
indicator blinks off once.
4. Press the POWER button
repeatedly (up to 300 times) until
the device to be controlled turns off.
The red indicator blinks off with each
button press.
5. Press and release STOP to install the
code.
5. To find the second digit, press Play
and count the number of blinks.
6. To find the third digit, press FF and
count the number of blinks.
Write your codes down here for easy reference
later.
Device Device stored Code
TV TV
CBL/AUX
VCR/DVD