Key Label Options
With the RM24941, you have the ability to customize individual keys and key label seg-
ments to meet your needs. It is recommended that the Key Label Options
feature only be used after you have finished programming all your devices.
This feature lets you select preset key options to be shown on the touch-
screen. You can change any LCD panel key except the
SCREEN
,
LEARN
keys. Any one of the available label options can be chosen for each key. You
can also choose to show only the key frame or hide the key completely.
com-
pletely.
To choose preset key label options for LCD keys, follow these steps:
1. Press and hold the
SETUP
key on the rubber keypad until the LED
indicator light remains on and the touchscreen shows the Main Setup
Screen. This process takes approximately 2-3 seconds.
2. Release the
SETUP
key.
3. Press and release the LCD
SCREEN
key. The LED indicator light blinks once to indicate
acceptance of the keypress.
4. The touchscreen now shows the Device Setup Screen. Press and release
the device key on the rubber keypad for the device whose keys you want
to customize (
TV
,
VCR
,
SAT/CBL
, etc.). The LED indicator light blinks
once to indicate acceptance of the keypress.
5. The touchscreen now shows the Key Label Screen. This screen shows the
current screen labels for the device you have chosen (TV, VCR, SAT/CBL,
etc.). The LCD
SETUP
and
SCREEN
labels are also shown.
6. Press any of the LCD panel keys within the current mode to select the
individual key label desired. Use the
SCREEN
key to switch back and
forth between the two screens for that mode.
Note:
The LCD
SLEEP
, and
LEARN
keys are displayed but cannot be edit-
ed as part of the Key Label Options routine.
7. The LED indicator light blinks once to indicate acceptance of the keypress.
Note:
If, at any time during Key Label editing, you wish to reset the current device keys to
their default settings, press and hold the current device key for three seconds. When you
reset any device key to its original power-on default setting, it will automatically be saved
at that setting. Resetting device keys will not affect your program codes or any Learned
commands.
8. To save your new label selections for the current mode, press another device key or the
SETUP
key. If you press another device key, the current mode screens are saved and the
touchscreen shows the screen for the new mode chosen. For example, if you have been
customizing keys for the TV Mode, pressing the
VCR
key on the rubber keypad results
in saving the TV key labels and placing the unit in the VCR Mode. If the
SETUP
key is
pressed, you exit the Key Label Options process and the touchscreen returns to Main
Setup Screen.
9. The relabeling of keys is now complete.
10. Press
CLEAR
on the Main Setup Screen to exit Setup Mode.
7
24941manual 8/13/03 8/19/03 8:42 AM Page 9
