7
To remove:
Pull the drawer out to the stop position.
Rotate all four swing locks to the unlock
position.
Lift the front of the drawer up and out.
To replace:
Make sure all four swing locks are
in the unlock position.
Place the sides of the drawer into
the drawer supports, making sure
the swing locks fit on the drawer slots.
Lock all four swing locks by rotating them
to the lock position.
How to Remove and Replace the Drawer
Empty the pan. Place the Chill/Thaw tray
in the pan. Place the items on the tray
and close the pan completely.
LCD Models:
Access by:
Home > Options > Refrigerator
Options >
CustomCool
Pan
Non-LCD Models:
Select the
ExpressThaw
™
,
ExpressChill
™
or
SelectTemp
™
pad. The display and
SET
light
will come on. Tap the pad until the light
appears next to the desired setting.
Use the following chart to determine the best
setting to use.
n
ExpressChill
can be set to 15, 30 or 45
minutes. The default is 15 minutes.
n
To stop a feature before it is finished:
For LCD Models:
Go into that feature’s menu and press
the
OFF
button.
For Non-LCD Models:
Tap that feature’s pad until no options
are selected and the display is off.
n
During
ExpressThaw
and
ExpressChill
,
the display on the controls will count down
the time in the cycle (on some models).
n
After the
ExpressThaw
cycle is complete,
the pan will reset to the
MEAT
setting
(32°F [0°C]) to help preserve thawed
items until they are used.
n
The displayed actual temperature of
the
CustomCool
pan may vary slightly
from the
SET
temperature based on
usage and operating environment.
NOTE:
For food safety reasons, it is recommended
that foods be wrapped in plastic wrap when using
ExpressThaw
. This will help contain meat juices
and improve thawing performance.
The custom cool pan is also a
Chill Compartment
(-2c to 3c) when selecting
Produce Setting and
Meat Setting
. As a Chill Compartment, the tray in
the pan should be removed.
About CustomCool
™
.
(on some models)
The
CustomCool
™
feature is used to quickly chill
items, thaw items or hold the pan at a specific
temperature. This feature is a system of dampers,
a fan, a temperature thermistor and a heater.
The pan is tightly sealed to prevent temperature
fluctuations in the rest of the refrigerator. The
controls for this pan are located on the dispenser
with the temperature controls.
The custom cool pan is also a
Chill Compartment
(-2c to 3c) when selecting
Produce Setting and
Meat Setting
. As a Chill Compartment, the tray in
the pan should be removed.
How to Use
ExpressThaw
™
ExpressChill
™
LCD Models Only
Non-LCD Models Only
How it Works
R
EFRIGERATOR
O
PTIONS
B
ACK
C
USTOM
C
OOL
P
AN
T
URBO
C
OOL
LCD Models Only
OR
