GE 2011 E - Star, Руководство пользователя

Страница: 72 / 96

72
7/28/2011
WASHABILITY COMPLAINTS
1. Level DW left to right and front to back.
2. Verify presence of air gap or high drain loop.
3. Confirm lower spray arm thrust washer is installed
4. Confirm spray arms spin freely.
5. Confirm spray arm jets are clear.
6. Confirm no breaches, tears or clogs in fine filter under the bottom spray arm. Clean if necessary.
7. Confirm coarse filter clean and seated with no gaps (not warped).
8. Remove cover inlet and sump filter.
9. Remove any debris from sump.
10. Reinstall sump filter and cover.
11. Confirm Calrod is operating properly. If not, check connections and TCO. If TCO is open,
suspect control problem.
12. Close detergent cup and use Service Mode to verify the lid opens.
13. Inlet water temperature should be at least 120 degrees F.
14. Turn on dishwasher and fill; check for correct water level
15. Test water hardness with WD01X10295 or WX5X370 test strip. Adjust detergent use
accordingly. Refer to Owner's Manual.
16. Use a highly rated detergent: generally detergent tablets or packs work best. Refer to Owner's
Manual.
17. Use a rinse agent.
18. Load dishwasher per Owner's Manual.
19. Select cycles and options according to the soil level. Refer to Owner's Manual.