GE 2-920SST Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 32

GE 2-920SST Скачать руководство пользователя страница 27

27

Problem

Solution

Unit beeps

• You may be receiving an out-of-range alert, move closer to

the base.

• Place handset in base for 10 seconds to reset the

phone. The CHARGE/IN USE comes on when reset is
successful.

• Put handset in base for 12 hours to recharge battery.
• Clean charging contacts on handset and base with a soft

cloth or an eraser.

• See solutions for “No dial tone.”
• Replace battery.

TALK light keeps flashing

• The base unit and the handset aren’t connecting with each

other. Place the handset in the base for 10-15 seconds (the
CHARGE/IN USE light on the base blinks one time.

Cannot hear the

• Set the RINGER to ON.

PAGE/FIND tone

Range is shorter

• Position the base antenna upward.

than normal

Battery will not hold a

• Be sure you are sufficiently charging the battery.

charge

The battery should be charged for 12 hours.

• Make sure battery contacts on both the handset and the base

are making contact and are clean; free of dirt or lint.

• When the handset is placed in the base, make sure that the

base CHARGE/IN USE light is on.

«
...
25
26
27
28
29
...
»

Содержание 2-920SST

































Отзывы:

Нет отзывов