16
Area Code
From the Handset Setup Menu:
1. Press the vol/CID (
6
or
5
) button to scroll to the
AREA CODE
sub-menu.
. Press the menu ok/mute button to enter the menu.
SET AREA CODE - - -
shows in the
display. The default setting is
- - -
.
. Use the touch-tone pad to enter your -digit area code.
4. Press the menu ok/mute button to confirm. You will hear a confirmation tone and the new
area code shows in the display.
NOTE: To restore the default setting to - - -, press and release the del/conf/
intercom button when
SET AREA CODE
shows in the display.
Tone/Pulse
From the Handset Setup Menu:
1. Press the vol/CID (
5
or
6
) button to scroll to the
TONE PULSE
sub-menu.
. Press the menu ok/mute button to enter the menu.
TONE/PULSE
4
1TONE 2PULSE
shows
in the display. The default setting is “
1 TONE
”.
. Use the touch-tone pad or vol/CID (
5
or
6
) to enter
1 TONE
or
2 PULSE
.
4. Press the menu ok/mute button to confirm. You will hear a confirmation tone and your
selection shows in the display.
Registration
Your packaged handset(s) are pre-registered and ready to use. It is not recommended that
a handset be registered again unless absolutely necessary.
From the Handset Setup Menu:
1. Press the vol/CID (
6
or
5
) button to scroll to the
REGISTRATION
sub-menu.
. Press the menu ok/mute button to enter the menu.
REGISTRATION 1YES
4
2NO
shows in
the display. The default setting is
2NO
.
. Use the touch-tone pad to select 1 for YES or for NO. Or use the vol/CID (
6
or
5
) button
to scroll to
1YES
or
2NO
.
4. If you select YES, press the menu ok/mute button.
HOLD BASE PAGE FOR 5 SECONDS,
THEN PRESS HANDSET MENU OK
shows in the display. (Your handset should be held near
the base during registration process.)