Installation Instructions
3.1Tape the door shut with masking tape.
REMOVE THE FRESH FOOD DOOR
3
3.4Set the door outside-up on a non-scratching surface.
3.3Remove the tape and tilt the door away from the
cabinet. Lift the door from the pin in the bottom hinge
bracket. (If the plastic washer sticks to the door bottom,
put it back on the hinge.)
3.2Using a 5/16
”
hex-head socket screwdriver and a
5/16
”
open-end wrench, remove the two screws
holding the center hinge to the cabinet. Lift the
center hinge to free its pin from the socket in the top
of the door, and set hinge and screws aside. Be
careful not to lose the center hinge spacer and
washer.
3.7Take one of the screws removed in step 2 and start
it in the outermost screw hole on the opposite side. Do not
drive it all the way down—leave enough space under the
screw head for thickness of the bracket.
14
REVERSING THE HARDWARE
4
REVERSING THE DOOR SWING
(CONT.)
2
3.5Transfer the two screws from the opposite side of the
cabinet to the screw holes vacated by the center hinge
removal.
3.6Transfer the washer (if your model has one) to the
opposite side.
3
REMOVE THE FRESH FOOD DOOR
(CONT.)
4.1 Move the bottom hinge bracket and plastic washer from the
right side to the left side.
Plastic
Washer
Hinge
Bracket
Switch the hinge pin to the
opposite side of the bracket.
