©
2009 by ge-tectronic
Page: 4
d. Low Noise
FastMute
Sonic XL
provides its own noise-protected power supply for attached equipment (PNA, PDA,
PPC) via the charging cable of the unit. The DIN-ISO Adapter is equipped with an integrated connector for charger
cable operation.
The integrated power supply output delivers a high quality and low noise output, because the output is protected
and additionally noise-screened. This minimises annoying electronic noise from the vehicle equipment.
Furthermore, the vehicle power output socket (generally the cigarette lighter) remains free, avoiding the
traditional cable spaghetti on the dashboard. Finally, both audio inputs are equipped with extensive noise
screening and thus interference and noise in the audio signals are even further reduced.
e. Output volume adjustment
FastMute
Sonic XL
provides its own amplifier with electronic volume adjustment.
The volume control (“Volume“) can be adjusted on the unit to vary its output.
For more comfortable operation of the output volume, an external volume controller can be connected via a jack
plug (optional). (Use Connector: “Ex. Volume Control“)
5. Assembly, Installation and Connection
a. Installation
Simple, plug-in installation: The supplied ISO DIN Adapter is simply installed between the radio and the
original wiring for all radios with DIN ISO Connection. If your vehicle does not have DIN ISO plug connections,
TELEKUNKEN supplies vehicle-specific adapters, in addition to the DIN ISO adapter.
Thus, the original wiring in the vehicle remains unaltered.
With some vehicles, the space available behind the radio is very limited. The DIN ISO adapter of the
FastMute
Sonic XL
is designed in such a way that the equipment can also be installed behind the glove compartment.
In this case, remove the glove compartment (usually fastened with four screws) and the radio from the console.
Run the DIN ISO adapter cable from the radio slot to behind the glove compartment. Attach all cables in
accordance with the following installation instructions. Ensure that the housing of
FastMute
Sonic XL
does not rest directly against the vehicle frame so that vibration cannot be transmitted to the equipment. If
necessary, fit foam material between the parts.
If your
FastMute
Sonic XL
has a ventilation opening on the upper part of the housing, ensure that the
heat can escape unhindered.
b. Connecting the DIN-ISO Adapter
Picture 1:
Remove the radio from the console following the
manufacturers’ instructions. Remove the DIN ISO plug
from the vehicle wiring harness at the rear of your radio.
Picture 2:
Insert the supplied DIN-ISO-Adapter between the radio
sockets and the vehicle wring harness.
If your vehicle does not have ISO connectors, our
accessory program can supply suitable auxiliary
adapters for your vehicle.