GE Security TruVision TVC-SD Series Скачать руководство пользователя страница 2

Copyright 

© 2010 GE Security, Inc. 
This document may not be copied in whole or in part or otherwise 
reproduced without prior written consent from GE Security, Inc., 
except where specifically permitted under US and international 
copyright law. 

Disclaimer 

The information in this document is subject to change without 
notice. GE Security, Inc. (“GE Security”) assumes no responsibility for 
inaccuracies or omissions and specifically disclaims any liabilities, 
losses, or risks, personal or otherwise, incurred as a consequence, 
directly or indirectly, of the use or application of any of the contents 
of this document. For the latest documentation, contact your local 
supplier or visit us online at www.gesecurity.com. 
This publication may contain examples of screen captures and 
reports used in daily operations. Examples may include fictitious 
names of individuals and companies. Any similarity to names and 
addresses of actual businesses or persons is entirely coincidental. 

Trademarks and patents 

GE and the GE monogram are trademarks of General Electric 
Company. 
Other trade names used in this document may be trademarks or 
registered trademarks of the manufacturers or vendors of the 
respective products. 

Intended use 

Use this product only for the purpose it was designed for; refer to 

the data sheet and user documentation for details. For the latest 
product information, contact your local supplier or visit us online at 
www.gesecurity.com. 

FCC compliance 

This equipment has been tested and found to comply with the limits 

for a Class A digital device, pursuant to part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a 
commercial environment. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in 
accordance with the instruction manual, may cause harmful 
interference to radio communications. 
You are cautioned that any changes or modifications not expressly 
approved by the party responsible for compliance could void the 
user's authority to operate the equipment. 

Manufacturer 

GE Security, Inc. 
HQ and regulatory responsibility: 
GE Security, Inc., 8985 Town Center Parkway,  
Bradenton, FL 34202, USA 
 

European Union 

directives 

 

 

 

 

2002/96/EC (WEEE directive): 

Products marked with this symbol 

cannot be disposed of as unsorted municipal waste in the European 
Union. For proper recycling, return this product to your local supplier 
upon the purchase of equivalent new equipment, or dispose of it at 
designated collection points. For more information see: 
www.recyclethis.info.

 

Contact information 

For contact information see our Web site: www.gesecurity.com. 
For contact information see our Web site: www.gesecurity.eu. 

 

 

Содержание TruVision TVC-SD Series












Отзывы: