GE Security Simon XT Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 60

background image

Chapter 2

Using the control panel

13

Guidelines for preventing accidental alarms

Use the following guidelines to prevent accidental alarms.

•

Close doors and windows before you leave your house.

•

Gather your belongings, so you can exit immediately after arming the system.

•

Always enter and exit within the programmed delay times.

•

Make sure you leave through a door that has a delay time set for it.

•

Disarm your system immediately upon returning home.

•

Be aware of the devices in your security system and learn how each one operates.

•

If you have pets, ask your installer if you need pet lenses in your motion detectors.

•

Check the location of your smoke detectors. Smoke detectors near bathrooms and kitchens can be
tripped by steam and smoke from cooking.

•

Make a note of the display, system beeps, and indicator lights that indicate the current system status.

Light control (optional)

Simon XT lets you control lights and appliances using lamp, appliance, or universal modules. You can do the
following:

•

Turn lights with unit numbers 1 to 8 on or off manually or at a specific time.

•

Turn on lights when a sensor is tripped. You can program lockout times when sensor-activated lights
won’t be active.

To turn on all of the lights that are controlled by lamp modules, press the

*

button twice. The panel display will

show

All lights on

. To turn off all lights that are controlled by lamp modules, press the

#

button twice. The

panel display will show

All lights off.

To turn on or off individual lights, do the following:

•

To turn on a light with unit number N (1 to 8), press the * button, then <N>. The panel displays and
speaks

Light <N> On

.

•

To turn off a light with unit number N (1 to 8), press the # button, then <N>. The panel displays and
speaks

Light <N> Off

.

Chimes

Use the chime feature to signal when a protected door is opened while the system is disarmed. The panel
chimes twice when a chime sensor is tripped, if the chime mode is enabled. This feature allows you to be
notified when family members are going in and out of your home. The chime and special chime features are
turned on or off in the system menu. See

Special chime

Note:

If there are no chime sensors in your system, the

chime option will not be in the System menu.

Voice chime

Your installer may have programmed the system to speak the sensor name or make a custom chime sound
when a chime sensor is tripped. The chime sound, if programmed, will be played in place of the standard chime
beeps.

«
...
17
18
19
20
21
...
»

Содержание Simon XT





























































Отзывы:

Нет отзывов

Похожие инструкции для Simon XT

Бренд: Galcon Страницы: 32

Бренд: Fanimation Страницы: 2

Бренд: M2M Страницы: 24

Бренд: H3C Страницы: 5

Бренд: H3C Страницы: 4

Бренд: L-Acoustics Страницы: 20

Airedale Sentinel

Бренд: Modine Manufacturing Страницы: 2

ACTIVAL VY51 5H006

Бренд: Azbil Страницы: 20

Бренд: Firmtech Страницы: 19

Бренд: National Instruments Страницы: 4

Бренд: CAME Страницы: 128

Comfort System Z-300-HC

Бренд: Jackson Systems Страницы: 2

Бренд: Waterbird Страницы: 19

MOBA-Matic MMC-1000

Бренд: MOBA Страницы: 172

Бренд: Vimar Страницы: 8

Alicat Scientific MC

Бренд: Halma Страницы: 2

Standard 22 GYRO COMPASS

Бренд: Raytheon Anschütz Страницы: 104

i-Kiosk 100 Plus

Бренд: FingerTec Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды