GE Security PTZ, Руководство по установке

Страница: 33 / 40

29
Surface-mount
Note: The camera is no longer IP66 rated after surface mounting the camera.
To surface-mount the camera, do the following:
1. Use the installation guide template to check the mounting location. Point the arrow on the label marked
“Front” towards the area of interest. Using the template as a guide, make a hole through the ceiling
(
Figure 17 ).
Figure 34. Camera assembly bracket
Note: For this installation, you must use the bracket depicted in Figure 35 on page 30. The GE 16X PTZ camera models have
different brackets that are designed to work with specific models.
CAUTION: The building superstructure must be able to support 80 lb. (36 kg).
Location
pins
Ceiling
Inside ceiling
Notch should face
area of interest