CyberDome II
User Manual
38
You have now disabled passwords. Anyone will be able to access the camera’s programming without a
password.
Installation date
To customize your installation date, do the following:
1. From the
Program select menu 2
screen, press
2
. The
Password protection
screen displays.
2. Using the joystick, pan right to proceed past the
Password protection
screen. The
Installation date
menu displays (
Figure 53
).
Figure 53. Installation date menu
3. Press
iris +
to edit the date.
4. Using the joystick to navigate the number selection string, enter the desired installation date in
YY/
MM/DD
format.
5. Once you have verified that it is the correct date, press
iris +
again to save the date.
Note:
Once set the installation date can only be cleared by doing a
Clear all
to reset to factory defaults.
Power up actions
You can set the CyberDome II to do a certain action when it is first powered up. To set a power up action, do
the following:
1. From the
Program select menu 2
screen (
Figure 47
on page 35), select
2
. The
Password protection
screen displays (
Figure 51
on page 37).
2. Using the joystick, navigate to right to proceed past the
Password protection
screen, and then again to
pass the
Installation date
screen.
3. Choose the action you want the camera to take when it first powers up.
•
Select
1
for none, or no actions.
CAUTION:
If you change the password from the default, when you select
Password disable
, the password is changed
back to the default automatically. So, if you ever reenable passwords, make sure to change the password
again, or remember that the password is the default password (3477).
Содержание CyberDome II
