1
Attach pendant mount box to ¾” NPT conduit.
Determine rotation of fixture and lock orientation
in place with provided set screw.
Feed the AC power cord through the conduit and
into the junction box.
Lift fixture up and hang on pendant mount box
using hinge piece.
Connect the green (ground), black (line) and white
(neutral) wires of the AC line to the similarly colored
wires of the fixture’s power cord using UL listed
wire connectors. Close junction box.
3
2
5
Pendant Mounting
AC power cord
The 0-10V dimming option uses a separate
2-conductor SOOW cable. Install cable per NEC
and local codes. For pendant mount option, cord
can be run through 1/2” NPT hole on top of the
mount box.
A 10V signal corresponds to 100% lumen output.
A 0V signal corresponds to ~15% lumen output.
Shorting the dimming wires dims the fixture to
~15% lumen output.
Swing fixture closed and secure with the slide clip.
Lock slide clip in place with screw.
Tighten
screw
4
Black
To AC Main
White
Green
Purple (+)
Gray (-)
Line
Neutral
Ground
0-10V(+)
0-10V(-)
To 0-10V
Dimmer
LED Driv
er
