GENERAL
This manual is a guide to the installation and operation of the
S700VT-MST fiber optic video transmitter. Please read the
entire manual before installing the equipment.
NOTE:
The series numbers S700VR is used the describe all
receiver models unless noted otherwise.
The S700VT-MST video transmitters system transmit one
video signal one from a camera to a monitoring station over
one multimode fiber. The S700VT-MST can be used with the
S700VR or S702VR series receivers.
A complete system consists of one transmitter and one
receivers.
Unpacking the Unit
In the event that anything is missing from the following list,
contact your authorized Fiber Options dealer or representa-
tive.
S700VT-MST Transmitter
Instruction manual
Save the original packing materials in case it becomes neces-
sary to return the unit.
Fiber Options
80 Orville Drive, Bohemia NY 11716-2533
US Tel
: 631-567-8320 or 800-342-3748
Fax
: 877-FiberFax (877-342-3732 toll free) or 631-567-8322
For international offices, see the back cover.
www.fiberoptions.com
GE Interlogix
Fiber Options
MODEL S700VT-M
MST
MINIATURE VIDEO TRANSMITTER
g
FIGURE 1: BASIC SYSTEM DIAGRAM
one
optical fiber
Video Out
S700VT-MST
S700VR
Video In
INSTRUCTION
MANUAL
FEATURES
The S700VT-MST transmitter housing is extremely small
measuring 1.5 in. (38 mm) by 1.04 (26 mm) by 24 mm
(0.94 in) . An ST optical connector is fixed to one end, while
a coaxial cable with BNC connector and a removable 2-pin
screw-terminal power connector are attached at the opposite
end.
The S700VT-MST transmitter can be used with any of the fol-
lowing receivers: S700VR-EST, S700VR-RST, S702VR-RST.
The S702VR-RST supports two transmitters.
All the receivers feature a diagnostic LEVEL/LOSS
TM
LED to
indicate the presence of valid fiber signal. (S702V cards have
two such LEDs).
Refer to TROUBLESHOOTING for more information. Rack-
mount receivers are designed to be mounted in a standard 19-
inch card cage (515R1 or 517R1). Electrical power input is
derived from the card cage.
