GE Interlogix MVC-14S, Руководство пользователя

Страница: 6 / 14

Installation MVC-14S User Manual
6 1036089A / November 2002
CAUTION:
To prevent the unit from overheating, keep it in a well-ventilated area and do
not place objects on the unit.
CAUTION:
To prevent fire and electric shock, do not expose the unit to moisture.
2) Set the signal input switch. For standard coaxial cable connection
set the switch to
VIDEO . For Y/C cable connection set the switch to
Y/C .
NOTE: For steps 3-4 use either the Y/C or the VIDEO connections, whichever corresponds
with the selection made in step 2.
3) Attach the video in connector of the monitor to the video output
connector of the unit providing video.
4) If applicable, attach the previously installed monitor’s video out
connector to the video input connector of an additional unit as
shown in Figure 2.
NOTE: The MVC-14S monitor is auto-terminating.
Figure 2. Camera and two MVC-14S monitors
5) Attach the monitor’s power cord (provided) to the AC input
connector.
6) Insert the power plug into an approved power source.
Other connections:
•
Connect the audio in connector to the audio output connector of a
VCR or other equipment.