GE Interlogix DVMRe Triplex, Быстрый старт, Страница: 6 / 16

5 | Connecting and Powering Up
CAUTION:
Powering Up
– For European electrical
systems, use the 220 V power cord
included with your DVMRe. Make sure
other components such as cameras and
monitors have the proper electrical plugs
as well.
To power up your system, you need an electrical outlet for the DVMRe, one for the monitor, and
one for each connected camera. Power up your system in the following order:
CAUTION:
Signal Loss
– If a camera is improperly
connected to the DVMRe, the monitor
shows a Signal Loss message. Check the
connection and reconnect the camera if
necessary.
Connecting and Powering Up
1 Plug the monitor and camera power cords
into the outlets.
TIP:
Powering Up
– When you plug the
DVMRe power supply into an outlet, the
DVMRe automatically detects all con-
nected cameras. The DVMRe shows which
version of software is installed, then shows
a display of live views from each con-
nected camera and automatically begins
recording.
2 Plug the single-prong end of the DVMRe
power cord into the power connection on
back of the DVMRe.
3 Plug the other end of the DVMRe power
cord into the outlet on the DVMRe power
supply. 4 Plug the DVMRe power supply cord into the
outlet.
0150_0269A.pmd 6/18/2003, 6:28 PM 6