Control Units CU-950 and CU-960
Instructions - 28-9414-37 Edition AA
13
5
CU-950 only:
Installation on ÄKTApilot
ÄKTApilot uses a CU-950 Advanced, with a 128 MB flash memory card.
The CU-950 unit and the power converter is placed near or inside ÄKTApilot.
Figure 5-1.
Schematic UniNet-1 and mains cable connections for ÄKTApilot.
How to connect the cables:
1
Connect the UniNet-1 data communication cable between the UniNet-1 port
on CU-950 and one of the UniNet-1 sockets on the controller rear panel
inside ÄKTApilot.
Note:
If a fraction collector is used, connect the fraction collector UniNet-1
cable between the controller rear panel inside ÄKTApilot and the
fraction collector, and the 1.5 m UniNet-1 cable between the fraction
collector and CU-950.
2
Connect the cable on the CU-950 power converter to the Input port on
CU-950.
3
Connect the mains cable between the power converter and the mains supply
socket inside the system.
4
Connect the Ethernet cable to the Ethernet port on CU-950. For connection
to and installation on the computer, please refer to the UNICORN
Administration and technical manual.
Power
converter
To computer
Ethernet cable
Mains cable
Analog IN
Analog out
UniNet 1
Digital I/O
Mains
Fans
Internal I/O
Press2 Press1 Valves
Air 2
Air 1
Fraction
collector
(optional)
UniNet-1 cable
UniNet-1 cable
CU-950
