background image

– 29 –

Warranty

I

Service trips to your home to teach you how to use 
the product.

I

Improper installation, delivery or maintenance.

I

Failure of the product if it is abused, misused, 
or used for other than the intended purpose 
or used commercially.

I

Damage to the glass cooktop caused by use of
cleaners other than the recommended cleaning
creams and pads.

I

Damage to the glass cooktop caused by hardened 
spills of sugary materials or melted plastic that 
are not cleaned according to the directions in 
the Owner’s Manual.

I

Replacement of house fuses or resetting of circuit
breakers.

I

Damage to the product caused by accident, fire, floods
or acts of God.

I

Incidental or consequential damage caused by possible
defects with this appliance.

I

Damage caused after delivery.

I

Product not accessible to provide required service.

What GE Will Not Cover:

This warranty is extended to the original purchaser and any succeeding owner for products purchased for

home use within the USA. If the product is located in an area where service by a GE Authorized Servicer is not

available, you may be responsible for a trip charge or you may be required to bring the product to an Authorized

GE Service location for service. In Alaska, the warranty excludes the cost of shipping or service calls to your home.
Some states do not allow the exclusion or limitation of incidental or consequential damages. This warranty

gives you specific legal rights, and you may also have other rights which vary from state to state. To know

what your legal rights are, consult your local or state consumer affairs office or your state’s Attorney

General.

Warrantor: General Electric Company. Louisville, KY 40225

All warranty service provided by our Factory Service Centers, 

or an authorized Customer Care

®

technician. To schedule

service, visit us on-line at GEAppliances.com, or call

800.GE.CARES (800.432.2737). Please have serial number 

and model number availa ble when calling for service.

Staple your receipt here. 

Proof of the original purchase

date is needed to obtain service

under the warranty.

EXCLUSION OF IMPLIED WARRANTIES—Your sole and exclusive remedy is product repair as provided in this Limited

Warranty. Any implied warranties, including the implied warranties of merchantability or fitness for a particular

purpose, are limited to one year or the shortest period allowed by law.

For The Period Of: GE Will Provide:

One Year

Any part 

of the range which fails due to a defect in materials or workmanship. 

From the date of the

During this 

limited one-year warranty, 

GE will also provide, 

free of charge, 

all labor 

original purchase

and in-home service to replace the defective part.

Содержание PB978DP1BB






























Отзывы: