18
The default operation mode of the remote controller is the “American customization". You can
modify with the parameter adjustment software or in “Control setting" on your APP. (See APP
control setting for more details)
Link
After leaving factory, the remote controller has been bound to the aircraft and ready to be
used. If the aircraft or the remote controller is replaced, then follow these steps to bind the units
together:
1. Turn on the aircraft.
2. Press and hold the ‘Return to home button’ in the remote controller and then press the ‘the
power switch’ button in the remote controller. At this moment, the remote controller gives a
warning tone, the red LED indicator light is on, and the four indicator lights of the power of the
aircraft in the remote controller flicker sequentially.
3. Press the power button of the aircraft for five times and wait for several seconds for the binding
procedure to finish. At this time, the green LED indicator light showing the status of the remote
controller is on.
