Instrumentation GDD Inc. 2018-11-09
29
8.6
Core name
Select a core from the current project. The following readings will be associated with that core.
8.7
Add core
Add a core to the current project.
8.8
Core info and edit
See or edit details of the selected core.
8.9
Measurements
Several times per second, the probe measures and displays three physical properties which are:
HF RESPONSE
: Conductor response measured in Hertz (Hz). It measures high frequency variations.
Its value increases with the quantity of conductive material in the sample. It decreases with
the distance between the probe and the sample.
SCPT 0.001 SI
: Magnetic susceptibility is indicated in SI unit by a factor of 10
-3
. SI = International
system of units. Its value increases with the quantity of magnetite in the sample and
decreases with the distance between the probe and the sample. It is important to note that,
with or without the presence of a conductor, the MPP-EM2S+ probe will measure the
magnetic susceptibility value at all times.
COND MHOS/M
: Conductivity measured in MHOS/M. It is independent on the quantity of
conductive material in the sample (HF Response) and independent on the distance between
the probe and the sample.
8.10
Memory count
shows the number of readings stored in the current project.
8.11
Current depth
This indicator shows the actual position on the core. Each time you take a reading in
Punctual
mode
or do a
Stamp
in
Continuous
mode, the
Depth
is incremented by
Spacing
value.
You can also enter in this field (by clicking on it) to modify directly the current
Depth
.
8.12
Current spacing
This field
indicates the current spacing value and allows to select another spacing value from the
list.
8.13
Add spacing
This field allows to add a new spacing value to the list.
8.14
Time till next initialization
This indicator shows the time elapsed from the last initialization and the time left till the next
required initialization. The time interval between initializations can be adjusted in
Config menu
- >
Settings
->
General
->
Initialization Time
.
