GDC SX-2000A Series Скачать руководство пользователя страница 13

Страница: 13 / 185

- 13 -

SX-2000A Series with Integrated Media Block/SX-2001A Series

User Manual

April 22, 2014

1.2. Safety Instructions

1.2.1. General Safety Instructions

•

The server is intended for installation in a restricted access location.

•

The operation environment required for the server should be 0ºC - 40ºC (32ºF - 104ºF).

•

For PLUGGABLE EQUIPMENT, the socket outlet shall be installed near the equipment and shall be

easily accessible.

•

Before operating your server, please read this manual thoroughly, and retain it for future reference.

•

Installation and preliminary adjustments should be performed by qualified GDC Technology personnel.

All warnings on the server and in the documentation manual should be adhered to.

•

All instructions for operating and maintaining the server must be followed closely.

1.2.2. Electrical Safety

Safety Warning

•

Do not expose the server to rain or moisture, to prevent fire or electrical shock hazard.

•

Use a dry cloth when cleaning the server.

•

Do not block any ventilation openings.

•

Do not install near any heat sources (e.g. radiators, stove or other apparatus that produce heat).

•

Refrain from removing the top cover of the server, to prevent electric shock. Consult Tech Support for servicing

or maintaining the server.

•

You are cautioned that any change or modification not expressly approved in this manual or approved in writing by

an authorized representative of GDC Technology could void your warranty and/or authority to operate this server.

Содержание SX-2000A Series


























































































































































































Результаты поиска

Содержание SX-2000A Series

Отзывы:

Похожие инструкции для SX-2000A Series

Бренды по названию

Популярные бренды

GDC SX-2000A Series, Руководство пользователя

Результаты поиска

Содержание SX-2000A Series

Отзывы:

Похожие инструкции для SX-2000A Series

Бренды по названию

Популярные бренды