DU-AG-0018-25 Rev J 4/19/17 GCX Corp Page 1 of 8
3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com
*See “Non-Table Mount” (page 3) for use of these parts.
Installation Guide
VHM Wall Mount Kit for Philips IntelliVue MX600/700/800 and MP60/70
The purpose of this guide is to:
1. Describe attachment of Philips-supplied Table Mount to Mounting Plate (page 2).
2. Describe mounting of VHM Arm in the Channel (page 2).
3. Describe attachment of Down Post to VHM Arm (page 3).
4. Describe mounting of Flexible Module Server (FMS) on Down Post (page 3).
5. Describe counterbalance adjustment (page 4).
6. Describe operation and adjustment of VHM Arm (page 5
– 6).
Parts Reference
The following parts and hardware are included in this installation kit (hardware not shown):
Tools Required:
5/32'' and 1/8'' hex wrenches (provided), Phillips screwdriver (not provided), and 1/2'' [13mm] socket
wrench (provided).
WARNING!
The VHM Arm contains a strong spring which is used to counterbalance the weight of the mounted
device. The Arm housing should never be disassembled by non-GCX personnel. Additionally, the
mounted device should only be removed with the Arm in its highest vertical position, and with the Height
Locking Lever engaged. Failure to follow these guidelines could result in serious injury.
Before mounting the Arm:
1.
Note that this arm has a wide range of motion both up/down and side to side. Please consider carefully the device
being mounted and the proximity of the assembly to other equipment, hospital personnel, and the patient. GCX
recommends that the hospital’s risk management personnel verify the appropriateness of the application prior to
installation and use.
2.
The combination of the MX600/700/800 and an 8-slot FMS exceeds the acceptable load limit for the VHM Arm,
however a 4-slot FMS can be used.
Item #
Description
Qty
1
VHM Arm with Mounting Adapter
1
2
Locking Lever, Height Adjustment
1
3
Cable Guide
1
4
6'' Down Post Kit
1
5
#10-32 x 3/8'' Socket Head Cap Screw (SHCS)
3
6
M6 x 12mm FHMS
3
7
5/32” [4mm] Hex Wrench
1
8
1/8'' Hex Wrench
1
9
1/2'' [13mm] Socket Wrench
1
10
Wall Channel Cover, 16''/40.6cm
1
*11
Spacer
1
*12
M6 x 14mm Pan Head Machine Screw (PHMS)
2
4
3
1
2
12