DU-PH-0062-01 Rev A 8/10/07 GCX Corp Page 2 of 4
Mounting on Post
1. Clamp PRC onto post as shown and tighten Clamping Knob.
Mount monitor according to Philips instructions.
Mounting Docking Station and Power Supply on Rail
Installation Note:
Docking station must attached to Mounting Bracket before PRC is rotated. See page 1, step 1 for
attachment of docking station. Power supply attachment is same as page 1, step 2.
1. Unscrew PRC from Mounting Bracket (not shown), rotate Clamping Knob 90º (Knob pointing upward) and re-attach to
Mounting Bracket as shown below.
2. Hook PRC over rail and tighten Clamping Knob (below right).
Unscrew PRC, rotate to position shown, and re-attach to
Mounting Bracket.
Installation Note:
Docking Station Must Be Attached to
Mounting Bracket before rotating PRC.
See page 1, step 2 for attachment of
power supply to Mounting Bracket.