DU-FLP-0008-11 Rev B 2/20/08 GCX Corp Page 1 of 3
Installation Guide
Dual Flat Panel Display Mount with VESA Mounting Plates for Posts (1.25'' or 2''),
VHM or M-Series Arm, or Variable Height Roll Stand (VHRS) Post
Installation Note:
This installation kit allows mounting of two (2) VESA-compatible flat panel displays with
enclosures
up
to 21'' in width (not diagonal measurement).
The purpose of this guide is to:
1. Describe attachment of Display Bar to 1.25'' or 2'' Post.
2. Describe attachment of Display Bar to VHM and M-Series Arms.
3. Describe attachment of Display Bar to VHRS Post.
4. Describe mounting of display on VESA Mounting Plate.
5. Describe adjustments to Display Bar.
Parts Reference
The parts list below includes parts and hardware that will be used in this installation procedure (see photos for parts;
hardware not shown).
Tools Required:
Phillips screwdriver, 1/2'' [13 mm] wrench, and 5/32'' hex wrench.
Item #
Description
Qty
1
Dual Display Bar
1
2
#10-32 x 1-1/8'' Socket Head Cap Screw (SHCS)
3
3
Extension, 5'' (for VHM Applications)
1
4
#10-32 x 3/4'' Flat Head Machine Screw (FHMS)
3
5
#10-32 x 3/4'' SHCS
3
*6
75/100mm Display Mounting Kit (includes hardware)
2
7
M4 x 6mm Pan Head Machine Screw (PHMS)
8
8
M4 x 10mm PHMS
8
9 5/32''
Hex
Wrench
1
* Required for displays with 100 x 100mm mounting patterns.
5'' Extension
Dual Display Bar
Display Mount Shown on 2'' Post