DU-CAP-0002-67 Rev A 2/16/16 GCX Corp Page 3 of 3
Routine Maintenance
Periodically inspect all fasteners associated with the mounting assembly. Tighten or Adjust as
necessary for optimal operation and safety.
Cleaning the Mounting Assembly
The mounting assembly may be cleaned with most mild, non-abrasive solutions commonly used in
the hospital environment (e.g. diluted bleach, ammonia, or alcohol solutions).
The surface finish will be permanently damaged by strong chemicals and solvents such as acetone
or trichloroethylene.
Steel wool or other abrasive material should never be used.
Damaged caused by the use of unapproved substances or processes will not be warranted. We
recommend testing of any cleaning solution on a small area of the mounting assembly that is not
visible to verify compatibility.
Never submerge or allow liquids to enter the mounting assembly. Wipe any cleaning agents off the
mounting assembly immediately using a water-dampened cloth. Dry the assembly thoroughly after
cleaning.
CAUTION:
GCX makes no claims regarding the efficacy of the listed chemicals or processes as a
means for controlling infection. Consult your hospital’s infection control officer or epidemiologist. To
clean or sterilize mounted devices or accessory equipment, refer to the specific instructions delivered
with those products.