DU-CAP-0002-67 Rev A 2/16/16 GCX Corp Page 1 of 3
Item #
Description
Qty.
1
1
2
1
3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180
www.gcx.com
Installation Guide
Roll Stand Post Mount for 75mm VESA Data Capture Devices on Welch Allyn
7000-MS3 Roll Stand
(Refer to qualified personnel)
Purpose: To describe installation of Post Mounting Assembly to Welch Allyn Roll Stand
The purpose of this manual is to describe general installation of Post Mounting Assembly to Welch Allyn
Roll Stand. This manual should be used in conjunction with any instrument-specific installation guides.
Please read this manual and all instrument-specific installation material before installing or using this
product.
Parts Reference
The following parts and hardware are included in this installation kit:
(
Hardware not shown)
Tools Required:
3/16” Hex Wrench (Provided)
5/32 Hex Wrench (Provided)
Phillips
Screwdriver (Not Provided)
2X 1/2"/13mm Wrench (Not Provided)
Ensure that the weight of the instrument being mounted does not exceed the load
rating limit of 10lb. Failure to do so may result in damage to equipment or injury.
1
3
3
2
3
Post Mounting Assembly
Cable Clip
Clamping Block
4 10-32 X 5/8 Socket Head Cap Screw 2
5 M4 X 8mm Pan Head Machine Screws 4