GCC Technologies Spirit, Руководство по обслуживанию, Страница: 6 / 160

Spirit/Spirit LS/Spirit GLS Maintenance Manual V.6
6
Chapter 1
：
Overview
1.1 Introduction
This manual is prepared for distributors to maintain or repair Spirit seies. Briefly,
 Chapter 1 is the introduction of contents, safety and operating enviroment
 Chapter 2, we have diagrams to show the part number for every part in different
sections.
 Chapter 3, introduction for electrical system
 Chapter 4, introduction to show you how to replace parts

Chapter 5, deals with the laser system for laser tube
、
beam & opitcal alignment.
 Chapter 6, an instruction to show you how to upgrade firmware
 Chapter 7, trouble shooting & system diagnostics
 Chapter 8, basic maintenance
 Chapter 9, FAQ
Manual contents may be subject to change without notice. Please contact GCC Customer
Service
by calling at 886-2-2694-6687 or e-mailing to tech.support@gccworld.com for services.
1.2 Safety
1.2.1 The Safety Interlock System
The laser system is equipped with a safety interlock system utilizing magnetic sensors
on the top and side access doors, laser-activation and door LED lights on the control
panel. The magnetic sensors will deactivate the laser when either door is opened. At this
time, the “door” LED light found on the control panel will illuminate, indicating an open or
improperly closed door. When the laser is in operation, the “laser” LED will illuminate to
inform the operator that the laser is activated. If at any time, any of the access doors are
open and the “laser” LED is illuminated, IMMEDIATELY unplug the laser system and
contact GCC service team for technical support and maintenance instructions.
WARNING
・
DO NOT operate the laser system if any component of the safety system is
malfunctioning.
・
DO NOT attempt to remove or modify any component of the safety interlock system.