GCC Technologies LaserPro Mercury, Руководство пользователя, Страница: 8 / 9

7
5. TIPS
- Next to the laser cutter, you will find a notebook with speed and power values for
different materials. If you are using a new material,
always do a small test .
- Make a small test cut by drawing a small circle, selecting it, and choosing
‘print selection’.
- Make sure this test cut is not on a piece of your material that you plan to use
for your actual design.
This is a good way to test your speed and power settings on a material for which we
don’t have settings in our list yet. If you work out good values for a new material,
please add them to our list in the notebook next to the laser cutter.
- Make sure your material lies flat on the bed. If your material curves too much,
the focus will vary a lot. This may cause the laser to not cut through the
material in certain areas.