GCC Technologies i-Craft, Руководство пользователя, Страница: 61 / 90

60
5.3
Menu function
5.3.1
Media Menu
Media menu Function Settings
Speed
To set or modify tool speed at horizontal
moving.
1-10
Pressure
To set or modify the value of pressure that
is being cut; make sure the material can be
cut through.
1-50
Over Cut
To generate an overcut to facilitate
weeding.
0.00mm-1.00mm
Quality
To set or modify cutting quality.
While cutting small letter, set as
“Fine”.
While cutting in high speed, set as
“Draft”.
Please note that if you set at a high cutting
speed, it may lower its cutting quality.
Draft, Fine
Tool Select
To select the corresponding tool that is
installed in carriage.
Regular blade,
Advanced blade,
Pen
Cut Test To perform a cutting test at present settings
5.3.2
SD Card Menu
SD Card menu Function Settings
Select file To select the file saved in the SD card. N/A
Scale To scale the image. 25~200%
Re-cut
To perform the same cutting job at current
position
1-99
Copies To duplicate job next to the 1
st
one 1-99