Guangcheng Technology
GC-6101 user manual
2. Equipment installation and use
This chapter will explain in detail the installation method, wiring method, the
meaning of the indicator light and the meaning of the interface of the GC-6101
module.
2.1 Module fixing
The installation method of the GC-6101 module is shown in Figure 2.1. You
need to use a flat-blade screwdriver for auxiliary installation.
Figure 2.1 GC-6101 module installation
First, you need to install the fieldbus coupler on the rail, and then attach the
GC-6101 module to the right of the fieldbus coupler or other modules to add
this component. As shown in Figure 2.1, insert the GC-6101 module inwards
along the slot until the latch snaps and clicks.
The GC-6101 module needs to be used with GCAN-PLC-400 or GCAN-PLC-
510 series controllers, and can be directly powered by the controller, so there is
no need to separately provide additional power to it.
2.2 Wiring method
As shown in Figure 2.2, first use a flat-blade screwdriver to insert into the
square hole and press the screw in the square hole. Then insert the cable into
the circular hole.
After plugging in, pull out the screwdriver, and the cable can be firmly locked
