GbSat 2CI0, Руководство пользователя

Страница: 18 / 52

B. USALS Positioner. The right
screen displays a list of 32
pre-programmed satellites. If you want
to change the satellite, select the
satellite on the right screen. Press the
OK button in the right screen. The dish
number will change to the selected
satellite.
C. Transponder . The column on the
right will display the transponder list for
the selected satellite. If you select one
of the alternative satellite names, then
the transponder list will be changed
accordingly.
D. LNB Power . The column on the right will display the LNB Power.
Normally, you should select the 13v/18v LNB Power and
9,750/10,600 LNB Local frequency for your universal LNB. You may
select the 14v/19v setting if you are operating a longer LNB cable.
E. If you are using a DiSEqC 1.0
switch for up to 4 LNB’s, then select
the correct switch type, i.e. DiSEqC
and then select the correct port (A,B,C
or D) for your satellite. Refer to the
switch manufacturers, instructions.
IA0.3 Installation & Operation