GBP Microclean, Руководство пользователя

Страница: 7 / 16

How to change the pump gasket
1. Unplug the machine from the power supply!
2. Empty the liquid, see: 'How to change the liquid'.
3. Unscrew the front plate and loosen the hose clip.
4. Loosen the two screws underneath the ground plate and lift up the pump.
5. Loosen the pump block and unscrew the pump wheel.
6. Change the gasket and put the pump together again.
7. Mount the pump, attach the hose and put the hose clip back on.
8. Refill the tank. See: 'How to change the fluid.
How to change of pump
1. Unplug the machine from the power supply!
2. Empty the liquid, see: 'How to change the fluid’.
3. Unscrew the front-plate and loosen the hose clip.
4. Loosen the two screws underneath the ground plate and lift up the pump.
5. Mount the new pump, attach the hose and put the hose clip back on.
6. Refill the tank. See: 'How to change the Fluid.
How to change the power cord
Work on electrical equipment must be performed by skilled personnel only.
Spare parts and accessories can be ordered from your supplier.
SPARE PARTS
38-100-0001 Brush
38-110-0001 Pump
38-102-0001 Pump gasket
38-103-0001 Net strainer
38-105-0001 Spray gun with hose
38-107-0001 Main switch
ACCESSORIES
36-190-0001 Ventilations hose
TECHNICAL SPECIFICATION
Spray gun with hose 1 st
Tank volume 8 litre
Pump capacity/min 28 litre
Max wash weight 20kg
Cleaning area WxDxH 515x170x335 mm
Cleaning table, WxD 515x340 mm
Outside dimensions, WxDxH 590x250x625 mm
Net strainer 1 st
Voltage supply 230V/50Hz 1fas.
Pump effect 85W
Weight 24kg
Fluid Low aromatic degreaser with
Flash point above 70°C
7
7