7
Chapter 2: Getting Started
2.1 Hardware Installation
I.
Turn off the power to your computer.
II.
Unplug the power cord and remove your computer’s cover.
III.
Remove the slot bracket from an available PCIe slot.
IV.
To install the card, carefully align the card’s bus connector with the selected PCIe slot
on the motherboard. Push the board down firmly.
V.
Replace the slot bracket’s holding screw to secure the card.
VI.
Secure the computer cover and reconnect the power cord.
2.2 Driver Installation for Windows
The following section shows you how to install 4-Port Gigabit Ethernet PCIe Card driver on
Windows operating systems.
1.
Insert the provided CD into your disk drive. The CD-ROM will start automatically. The
following screen will show up and please click “
Install Driver
”.
*Note: Actual image may vary
Note
: If the install program doesn’t run automatically, please locate and double-click on
the
Autorun.exe
file in the CD to launch the install program.
