7
2.2 Hardware Installation
1. Turn off the power to your computer.
2. Unplug the power cord and remove your computer’s cover.
3. Remove the slot bracket from an available PCIe slot.
4. To install the card, carefully align the card’s bus connector with the selected PCIe slot on the
motherboard. Push the board down firmly. This card works in PCI Express slots of additional lanes (x4,
x8 or x16 slots)
5. Replace the slot bracket’s holding screw to secure the card.
6. Secure the computer cover and reconnect the power cord.
2.3 Driver Installation
The following section shows you how to install 2-Port 10G 5-Speed Multi-Gigabit Network Card driver on
different operating systems.
Installation for Windows
Insert the provided CD into your disk drive. The CD-ROM will start automatically. The following screen
will show up and please click “
Install Driver
”.
*Note: Actual image may vary
Note
: If the install program doesn’t run automatically, please locate and double-click on the
Autorun.exe
file in
the CD to launch the install program.
Please click “
PCIe Intel
” to start the installation.
Follow the instructions on screen to install the driver.
