Chapter 2: Installation
2.1 Hardware Layout
I.
Turn Off the power to your computer.
II.
Unplug the power cord and remove your computer’s cover.
III.
Remove the slot bracket from an available PCIE slot.
IV.
To install the card, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. Push
the board down firmly.
V.
Replace the slot bracket’s holding screw to secure the card.
VI.
Replace the computer cover and reconnect the power cord.
2.2 Driver Installation
The following section shows you how to install Fast Ethernet PCIe Card driver on different
operating systems.
Installation for Windows XP/Vista/7
1.
Insert the provided CD into your disk drive. The CD-ROM will start automatically. The following screen will show up
and please click “
Install Driver
”.
Note:
If the install program doesn’t run automatically, please locate and double-click on the
Autorun.exe
file in the
CD to launch the install program.
