GBF SentryLink, Руководство по установке

Страница: 5 / 17

Installation Checklist:
1. Ensure power wire length is no more than 15 meters (50
’ max.)
2. Ensure Ethernet cable distance no more than 100 meters (3
50’ max.)
3. Confirm internet connectivity from primary router to the SentryLink Door Station
mounting location
4. Check the door lock type: NO/COM (e.g. door strike) or NC/COM (e.g. mag
lock).
5. Collect all tenants
’ emails which are registered in GBF SentryLink APP.
6. Get the device GID no. from the back of the device.
7. Access the SentryLink Settings page and set the device time zone to match
your install location.
Accessing the SentryLink Settings Page
- The settings page on your SentryLink outdoor unit is accessed using a
12-digit password typed in to the touch-screen keypad. Check your
connections and apply power to the SentryLink unit. It will fully boot to
a tenant directory screen (empty for now) after a few moments. When
fully started, press the ‘Password’ are near the top of the screen to bring
up the 10-digit keypad. Type in your 12-digit admin password. (Default
password is 888888888888).
*** Important: Please change the default password during initial
installation.
*** Important: Please write down and store you new password as a
forgotten password requires factory intervention and may take up
to 24 hours to be reset!