GBC VOYAGER, Инструкция по эксплуатации

Страница: 27 / 54

© GBC Films Group April 2000
Voyager Operation and Maintenance Manual
Page 1 - 25
Operations
14. RESERVOIR FILL PORT: This is where the
operator would fill the reservoir with water if the reservoir
site glass is at less than the half mark.
4.4 Safety features
1. EMERGENCY STOPS: Three exist around the
Voyager laminator. Two are located on the control side
of the machine and the third is located on the drive side
on top of the electrical box.
2. SAFETY SHIELD - HEAT ROLLER: This shield
covers the main heat transfer roller. When the safety shield
is raised, the laminator will only operate when the E-
STOP RESET and the FORWARD or REVERSE
buttons are pressed simultaneously.
3. SAFETY SHIELD - PULL ROLLERS: This shield
covers the knife section as well as the pull rollers. When
the safety shield is raised, the laminator will only operate
when the E-STOP RESET and the FORWARD or
REVERSE buttons are pressed simultaneously.
4. SHIELD INTERLOCKS: Keys on the safety
shields must be inserted into the interlocks for the
laminator to operate in auto run mode.