GBC Talon 44 CE, Руководство по эксплуатации и обслуживанию

Страница: 14 / 72

14
I
SPECIFICATIONS - TALON 44
Operating Speed:
Up to 10 fpm (3 mpm)
Temperature range:
32 O F - 270 O F (0 O C - 132 O C)
Max. Mounting Thickness:
1/2 in. (1.3 cm)
Max. Film Width:
Talon 44: 44 in. (112 cm)
Dimensions (W x D x H):
Unit alone: (Figure 1)
64.5 in. x 40.25 in. x 51.5 in.
(164 cm x 102 cm x 131 cm)
Shipping:
67 in. x 43 in. x 62.5 in.
(170 cm x 109 cm x 159 cm)
Weight:
Unit alone: 788 lb. (357 kg.)
Shipping: 965 ib. (438 kg.)
Electrical Requirements:
Refer to the serial plate located on
the rear of the laminator for the
specific electrical rating applicable
to the unit.
Voltage: 220V~60 Hz
Current: 14.3A
Power: 3200 W
Phase: Single
FCC NOTE: This equipment has
been tested and found to comply
with the limits for a Class A digital
device, pursuant to part 15 of the
FCC Rules. These limits are
designed to provide reasonable
protection against harmful
interference when the equipment is
operated in a commercial environ-
ment. This equipment generates,
uses, and can radiate radio
frequency energy and, if not
installed and used in accordance
with the instruction manual, may
cause harmful interference to radio
communications. Operation of this
equipment in a residential area is
likely to cause harmful interference
in which case the user will be
required to correct the interference
at his/ her own expense.
Changes or modifications not
expressly approved by General
Binding Corporation could void the
users authority to operate the
equipment.
This Class A digital apparatus
complies with Canadian ICES-003.
(Cet appareil numérique de las
Classe A est conforme a la norme
NMB-003 du Canada)
Fig. 1
64.5 in.
(164 cm)
51.5 in.
(131 cm)
40.25 in.
(102 cm)
GBC Talon 44